PVC Roller Shutter Pasini FUTURA 4.0 TOP with Terminal in Extruded Aluminum 14x55
FUTURA 4.0 TOP: Overall dimensions 14x55mm - Weight 6.2 Kg m2 - Terminal in Extruded Aluminum
The FUTURA 4.0 TOP roller shutter is the evolution of the traditional Pasini solution for PVC shading systems. FUTURA 4.0 TOP PVC roller shutters guarantee excellent performance, rigidity and strength .
The FUTURA 4.0 PVC roller shutter is available in a wide range of plain and faux wood colors and is supplied with a matching extruded aluminum terminal .
If you wish on Windowo you can also buy the Pasini FUTURA 4.0 alternative version with rubber terminal.
Optional: fast delivery PVC roller shutter
Standard delivery time around 10-15 working days.
Fast delivery in just 3-4 working days by paying a surcharge of 19.9 euros (contact us if interested).
Pasini Futura 4.0 TOP PVC roller shutter features:
- PVC roller shutter;
- Arched structure with longitudinal ribs;
- Overall dimensions 14 × 55 mm;
- Supplied with metal reinforcements one every two bars;
- Weight sq.m: about 6.20 kg;
- Weight mtl: about 260 g;
- Slats per square meter: 18.2;
- Maximum use guaranteed in width: 2,000 meters;
- Lateral stop;
- Equipped with an extruded aluminum terminal;
- Base and height measurements made to measure;
- Choice of colors;
- Minimum m2: 1.5.
Indications for the use of the PVC roller shutter
- When the house is not yet inhabited, but with roller shutters installed, leave the rolled-up fabric inside the box. If this is not possible, refer to points 2 and 3.
- Keep the slats and the window slightly open to facilitate ventilation and therefore lower the temperature between the roller shutter and the window.
- Make sure that the sheet remains raised by at least 1 cm from the dock, to avoid that the weight of the roller shutter, acting on the end part, (last 5/6 slats) from causing deformation.
- Avoid installing overhanging frames, especially if they are of considerable size.
Please note:
- The roller shutter for sale does not include the guides;
- The roller shutter will be shipped complete with a roller attachment system for manual handling;
- The roller shutter will be supplied with the holes and stop caps, if you do not want the holes contact us;
- The shutter will be supplied with slotted slats (except the first 5 slats), if you want all the blind slats contact us;
- Deadbolts on terminal or intermediate available on request.
How to measure a PVC roller shutter?
We advise you to proceed differently according to the type of intervention:
- Replacement of an existing roller shutter : it will be sufficient to select the product corresponding to the pre-existing roller shutter, to measure the size of the old roller shutter.
- Replacement or new installation of the roller shutter and the sliding guides : for the width of the roller shutter, with reference to the guides to be used, the necessary tolerances must be applied.
- Enter the finished measurements, in millimeters (base and height). By finished measurements, we mean the total measurements of the product, including any side caps and completion accessories.
For the choice of the shutter profile , (if a replacement is to be made), the height of the single plank is measured without considering the connecting hook between the slats.
When ordering, you will be asked to indicate the base and height measurements, specifying whether the roller shutter measurement is finished or empty.
What is the difference?
- Finished size (i.e. the exact size of the hole): the mosquito net will be supplied with the same measures ordered;
- Compartment size : the mosquito net will be supplied with 2-3 mm less base and height.
Many colors to choose from for your new customized roller shutters
Pasini PVC roller shutters are offered online in a wide range of colors (they may vary from monitor to monitor).
Please note: Colors 3 - 7 - 8 - 25 - 10 - 22 - 11 - 26 - 13 - 19 - 29 - 30 - 31 - 32 - 33 - 34 -35 - 36 are never guaranteed for any loss of color.
If you want to be sure of the color, we advise you to contact us (color disputes will not be accepted if we have not been contacted before during the order phase).
The FUTURA 4.0 PVC roller shutter is produced in
many colors and includes the
terminal in extruded aluminum in the same color .
Pasini SpA Italian PVC shutters
Pasini PVC roller shutters are rigorously and proudly
produced in Italy .
Born as a company specialized in the production of roller shutters, Pasini SpA over time has added more elaborate solutions to the original line, such as adjustable roller shutters and armored and burglar-proof roller shutters.
