High Tack Extra Strong: MS Polymer-based adhesive suction cup for PVC trims
High Tack Extra Strong adhesive, ideal for gluing PVC trims when installing windows
One-component white adhesive paste for gluing PVC trims in the installation of windows and doors based on reinforced MS Polymer .
High Tack Extra Strong
has 3 characteristics that make it exceptional and unique: the great density of the paste that allows clean applications without smudging, the remarkable "
suction effect " that allows you to keep the element to be glued in the desired position immediately after application and a great versatility of use due to its remarkable adhesive strength.
How does High Tack Extra Strong adhesive work?
Specifically designed for gluing PVC trims in the installation of windows and doors. Thanks to its immediate suction effect, it avoids the initial detachment even of deformed flats. Complete drying takes place at a speed of about 2 mm per day.
How can it be used?
Universal adhesive for the following uses:
- Bonding of panels, frames, window sills, mirrors, thresholds, skirting boards, tiles, steps, ceramics, natural stone, wood and insulating materials in the building sector;
- Not suitable for the following surfaces: PE, PP, Teflon, bituminous surfaces, gypsum, underwater applications, not suitable for structural bonding;
- Excellent adhesion on porous materials (marble, concrete, plaster, brick) without using the primer;
- Suitable for both indoor and outdoor;
- Absence of solvents, isocyanates and PVC - practically odorless;
- Excellent resistance to UV rays;
- It can be overpainted after drying (attention: to overpaint with wall paints wait at least 24 hours. If it is overpainted with silicate paints, color changes may occur);
Advantages of the PosaClima adhesive for PVC window frames
- Adherent surfaces must be clean;
- On particular materials, before applying the product, carry out an adhesion test;
- Wet surfaces are not a problem, on the contrary they improve adhesion;
- In universal applications in construction on large surfaces (eg gluing mirrors) do not create a continuous perimeter curb but apply the product in strips so as to allow the entry of humidity and air necessary for a correct polymerization of the product;
- To glue the PVC strips it is sufficient to apply adhesive spots every 10-30 cm depending on the degree of deformation of the plate;
- Also suitable for bonding strips to the outside.
Disposal: where to throw the High Tack Extra Strong adhesive?
- Deliver the residues to a collection point for harmful substances ; comply with local disposal regulations.
- Warning: the expired product is much more viscous and normally loses its tenacious adhesion power on various materials.
- However, it still continues to film as the product is not spoiled.
High Tack Extra Strong certifications and performance
- Density at 23 ° C (DIN 53217-T2): 1.57 g / cm³
- Shore-A hardness (DIN 53505): Approximately 55 minutes
- Surface drying time (23 ° C / 50% rF): About 15 minutes
- Hardening (23 ° C / 50% rF): About 2 mm / day (7 days before the tear test)
- Elastic Modulus 100% (DIN 53504): Approximately 1.39 N / mm2
- Elongation at break (DIN 53504): 335%
- UV resistance : Good
- Overpaintable : When completely hardened
- Temperature resistant : -40 ° C to +90 ° C
- Processing temperature : From +5 ° C to +40 ° C.
- Storage : 12 months, in a cool and dry place
- Consumption : Approximately 10 linear meters of sealing with a 5 mm diameter bead
- Environmental certifications : EMICODE EC1 Plus
Videotutorial: how does an adhesive work to glue window frames?
PosaClima: products for gluing PVC trims
PosaClima is the Made in Italy system for the installation of high energy efficiency windows . The advantages of this system range from high thermal and acoustic efficiency to flexibility in the construction phase. Discover all the PosaClima accessories in the Windowo online shop.
