T-BOND PRO.1 Fischer 300ml - Hybrid Resin Chemical Anchoring Concrete and Masonry
T-BOND PRO.1 Fischer resin for anchoring in cracked concrete and masonry, in 300ml silicone cartridge.
| Product |
Art. |
Content |
| T-BOND |
93179 |
1 cartridge + 2 FIS S mixers |
What are the advantages of Fischer T-BOND PRO.1?
- T-BOND PRO.1 is a chemical anchor certified for use in cracked and non-cracked concrete and masonry;
- Injection resin can be used in moist and water-wet holes;
- The Portland cement contained in the chemical anchor T-BOND PRO.1 allows to maintain high load levels for the temperature range between - 40 ° C up to +120 ° C;
- The wide range of accessories available for T-BOND PRO.1 resin ensures great flexibility of the system and allows a wide range of applications;
- T-BOND PRO.1 can be used with standard silicone guns.
T-BOND PRO.1 Fischer is
certified for anchors in:
- Concrete with class from C20 / 25 to C50 / 60, cracked (M 10, M 12, M 16 and M 20) and non-cracked;
- Solid brick in brick;
- Solid calcium silicate brick;
- Semi-solid brick (vertically perforated) in clay;
- Semi-solid brick (vertically perforated) in calcium silicate;
- Normal concrete hollow block;
- Lightweight concrete hollow block;
- Autoclaved aerated concrete (cellular).
Certificate for connection of post-installed reinforcing bars in:
- Concrete with class from C20 / 25 to C50 / 60, cracked and non-cracked, for bars with improved adhesion with a diameter from 10 to 20 mm;
- Also suitable for: C12 / 15 concrete.
Fischer T-BOND injection resin for use with:
- Threaded rod FIS A, for concrete and masonry;
- RG MI internally threaded bush, for concrete;
- FIS E internally threaded bush, for masonry;
- FIS HK mesh anchors, FIS HN sock and FIS HL mesh bushes, for masonry.
For
fixing :
- Metal constructions;
- Wooden constructions;
- Facades;
- Stairs;
- Steel shelves;
- Cars;
- Awnings;
- Canopies;
- Gates;
- Console;
- Grilled;
- Satellite antennas.
Choose the polyester resin for masonry applications FIP C 700 HP (Art.93446, available in the "Sealants" category)
or T-BOND (the article you are looking at at the moment)
based on the characteristics of your silicone gun.
- Safe : the T-BOND system is composed of a polyester-based chemical anchor certified for applications in solid and hollow brick masonry.
- Hybrid : Portland cement contained in the T-BOND polyester chemical anchor guarantees excellent resistance to temperatures up to + 120 ° C.
- Complete system: the different formats and the complete range of accessories makes the system extremely flexible and allows numerous applications.
Instructions for use Fischer T-BOND PRO.1
- T-BOND PRO.1 is a two-component hybrid injection chemical anchor.
- Resin and hardener are in two separate containers and are not mixed or activated until extrusion takes place through the mixer.
- Before installing, clean the hole according to the instructions given.
- Extrude the resin starting from the bottom of the hole, taking care not to leave it free of air bubbles.
- Insert the bar manually by rotating it until it reaches the base of the hole.
- The resin adheres to the entire surface of the anchor rod and the surface of the hole, sealing it.
- The two cartridges are quick and easy to use with fischer pistols.
- Partially used cartridges can be reused simply by replacing the mixer.
NOTE: To get to know the product completely and make the most of its capabilities, we recommend watching the video and reading the PDFs included in the product sheet.
