Bollard for Pipes 60 mm Against theft of Grimpo Downpipes in Brown Painted Steel
Grimpo 60 mm: the bollard with spikes for pipes from 58 to 62 mm
Grimpo 60 mm is a bollard with anti-theft tips against theft from generic pipes and gas
pipes, for pipes with diameters from 58 to 62 mm.
Main advantages bollard with spikes for small pipes:
- excellent obstacle against thefts carried out by climbing from rain pipes or pipes: the attacker is hindered by the pointed bars, which do not allow him to continue;
- easy installation , no electric tools are needed, it is mounted with two screws included in the package, in case of incorrect installation it is possible to disassemble it, reassemble it in another position without leaving holes;
- anti-theft bollard made of steel and treated with epoxy paint to ensure high protection against atmospheric agents;
- anti-thief bollard for your safety is a Made in Italy artisan product .
4 reasons to install a Grimpo bollard in your home:
- Excellent obstacle against thieves : the spikes serve to remove the possibility that they can climb using the external pipes as holds.
- Easy to install : no power tools needed. You can mount it with two screws included in the package. In case of incorrect installation, you can disassemble it and reassemble it in another position or on another pipe;
- Zero infiltration on the downspout : thanks to the practical collar it does not pierce the downspout and therefore you do not risk leaks during the rain;
- Made of steel : it has a very resistant structure and is treated with epoxy paint to resist atmospheric agents.
How to install the Grimpo anti-thief bollard?
Installation is quick and easy . You can install it on the downspout through the supplied collar, with screws and nuts. This system avoids holes in the wall and downspout that could cause infiltration in the piping.
If you want to disassemble it, disassemble it and mount it in another place? You can do it whenever you want.
It can also be used for pipes smaller than 50 mm., Using only the collar provided with the tips, anchored to the wall.
Where is the Grimpo collar installed?
- On small downspouts, small gas pipes and the like, near windows, balconies and terraces;
- To protect surveillance cameras, and anti-theft sirens.
Technical characteristics of the anti-theft bollard
- Use : downpipes diameter from 58 to 62 mm;
- Material : steel;
- Anti-intrusion bars : 12 mm square drill section (nr. 5) length 240 mm.
- Finish : epoxy paint for outdoors, brown RAL 8017;
- Covered area : 530x310 mm.
Discover Grimpo, the obstacle on the downspouts against theft
Grimpo products have a quick and easy installation. These effective anti-intrusion devices prevent thieves from exploiting certain points to make unexpected "nasty visits". Finding this obstacle along the climb, the attacker will be unable to reach his goal.
Grimpo anti-thief bollards are in accordance with the law
In order for the fixing to comply with the law, these anti-theft devices must necessarily be mounted at a height sufficient to prevent injury to people. The right of ownership, pursuant to Art. 832 of the Civil Code, gives its owner, owner of the property, the right to provide suitable means to defend the property (aimed at causing offenses to third parties who wish to disturb the enjoyment of the right of ownership ). These means (barbed wire, fences with pointed bars, etc.) are defined as "offendicula" and are subject to the justification pursuant to Art. 51 of the Criminal Code.
Therefore, such devices are allowed by law, provided that the following requirements are met: be in sight and not hidden, that they are not seriously harmful (i.e. that they offend disproportionately to the property to be defended, for example if they cause irreversible damage or death ), which do not cause damage to those who have no aggressive intentions and which are reported.
Grimpo products, if installed correctly, fully comply with the requisites required by the ruling pursuant to Art. 51 of the Criminal Code.
