How to fix broken mosquito nets? Read the Windowo guide!
What is essential, especially in the warmer seasons, is to be able to keep insects away from your small cozy nest, therefore it is of fundamental importance to check for
broken mosquito nets .
Sometimes, due to external or internal agents or neglect, small or even large holes may form on the mesh, or it may happen to damage the supporting profile. This is a serious problem, capable of nullifying all the protective effect guaranteed by the frame and favoring a preferential lane for insects inside your home, causing unpleasant surprises.
Do you want to remedy this situation?
Repairing the mosquito net can seem something difficult and expensive, especially when it is necessary to replace quality models, so we have prepared for you a practical and quick guide to alleviate the discomfort of broken mosquito nets in every situation. Here are the problems of mosquito nets that we explain how to solve in this guide:
Broken mosquito nets: small holes
Repairing mosquito nets that have
small holes is very easy. The important thing is to
do it as soon as possible and not underestimate the situation.
Staying idle can promote an increase in the size of the lesion, which can degenerate into a tear.
Therefore, follow the advice and start the repair.
What do you need to repair the small holes in the broken mosquito nets?
- Professional glue for the repair of PVC inflatable boats
- Thin brush (optional)
Procedure for repairing the holes:
- Cleaning . First, I always advise you to clean the area of the broken mosquito net well , otherwise dirt can ruin the final result of the repair. If you are looking for advice, read our article on how to clean the mosquito net.
- Prepare the area . Next, straighten the broken threads at the edges of the mesh hole, so that you can create a support area to apply glue between the two ends.
- Paste . Use the sticky substance on the wound contour with a thin brush to facilitate application.
- Let it dry . Your broken mosquito net will be as good as new.
A tip is to repair the mosquito nets late in the evening, so as to keep them at rest for the whole night.
Repair mosquito nets: small irregular holes
If your broken mosquito net has small
holes with irregular edges , it can be difficult to glue the two ends of the hole without leaving any gaps.
For this, there is a solution.
What you need to fix small uneven holes on mosquito nets :
- Adhesive tape for mosquito nets
- Scissors
- Meter
This
mosquito net tape is a special scotch tape , which shows the perforated pattern of the net.
Procedure for closing irregular holes
- Cleaning . Especially in the presence of adhesive tape, cleaning is essential to prevent dirt from being permanently trapped behind the adhesive end.
- Cut and paste . After measuring the width of the hole in the broken mosquito net, cut a rectangular piece of adhesive tape that is larger than the space to be covered, about 3-4 centimeters larger , and place it on the lesion.
To enhance the aesthetic effect, look for an adhesive tape for mosquito nets that is
as similar as possible to your net, so as to overlap the weave.
Broken mosquito nets: medium or large rips
When the situation is more complex and now the insects fly freely around your house, you need to repair the mosquito nets in a more incisive way to avoid replacing it entirely.
What material is needed to repair torn mosquito nets?
To repair
medium or large tears , you need to find this material:
- Half moon needle or tweezers
- Net for mosquito net
- Wire
- Dressmaker's tape measure
- Masking tape (paper)
- Scissors
Procedure for repairing tears on mosquito nets :
1. Choose the patch
The first thing to do before repairing mosquito nets with medium holes is to
measure the width of the hole and purchase a mesh that is larger than the tear in question. After that, a patch must be applied to prevent access to insects.
Look for a type of replacement net of the
same model as your mosquito net , so you can overlap the two nets and get a better aesthetic effect.
The next step to repair the broken mosquito net is to prepare the base on which to go and intervene with the needle or the tweezers, to be used to join the patch to your net.
2. Pull the threads of the patch
Start by pulling the outer threads around the edges of the patch to create an inch or two of fiber fringe on each side.
3. Bend the threads
Then,
fold the tapered threads of the four sides of the patch to create sharp, right angles.
4. Place the patch
Place the patch over the hole in the broken mosquito net and
proceed by sewing the two ends using a needle and thread.
5. Sew the patch
At this point, it is necessary to pass the yarn through the mesh of the net following a
zigzag stitch .
You can use any type of line for this operation, although the most recommended is fishing line, as it is very strong and invisible.
You can work either with the broken mosquito net in vertical position on the frame, or disassemble the mosquito net and operate on a plane.
If you opt for the first choice, it may be more complicated to work on installing the patch. For this, help yourself by temporarily fixing one of its ends on the mosquito net with adhesive paper tape, so as to always remain in place.
6. Secure the patch
It is very important to secure the patch well, so that it
stays flat on the screen , as the closer the two ends are, the better the result.
After working on one side, proceed to the other side of the mosquito net, using tweezers to fold the fringes and further secure the patch in place.
This way it is fixed and, if you need more security, you can proceed by applying a light coat of glue.
Repair mosquito nets: structure
As the popularity of mosquito nets increases, it is increasingly useful for owners to know how to manage and repair them when needed.
Often the main problems of having to repair mosquito nets are due to tearing of the nets, especially if you have lively animals at home. What if, instead, the discomfort came from the
structure ?
Edge of the aluminum broken mosquito net
Often, to clean or for routine maintenance, it is necessary to
remove the fixtures . And even in case of breakage, it is necessary to repair the mosquito nets through spare parts that must be removed and replaced.
This is a very simple operation that requires some precautions, such as remembering the position of the screws and components.
A quick and easy job that allows you to ward off insects thanks to your effective ally: your mosquito net.
Roller broken mosquito net
A more complex job turns out to be that of roller insect screens, since it is a more cumbersome structure that requires the
identification of the problem .
There are, in fact, a multitude of cases that can determine its malfunction: the breakage of a tensioner or a hook, or even the spring that allows you to collect the mosquito net.
Once the error is detected, what you need to do is to
purchase valid replacement parts for the roll-up insect screen.
Remember that not all parts are the same, for example some mosquito nets have a differently shaped hook. Therefore, be sure to purchase a compatible replacement before proceeding with the repair of the mosquito nets, replacing the damaged parts.
What do you need to fix a roller insect screen?
Needed to remove the roller :
- Normal and Phillips screwdriver
- Replacement parts
- Pliers
Procedure to fix the roller of the mosquito nets :
- Remove the side rails . If your mosquito net is broken due to problems in the roller, you will first need to remove the side rails, where the net slides up and down, using a screwdriver to disassemble them.
- Remove the roller . Then, with tight pliers, pull the side guides that hold the roller in place and then pry downwards. In this way, the roller can be detached from the wall and, by settling on a plane, you can work on the malfunction in a targeted way.
- Operate on the roll . With a Phillips screwdriver work on the roller, removing the clips that block the net and paying attention to the internal spring.
This operation is useful for fixing your mosquito net and is also necessary when the elements become dirty and dusty for routine maintenance.
Our advice
Taking care of your mosquito net is very important, so we recommend that you regularly carry out annual checks to check the health of the net and the profile.
Sometimes the hitches can arise with problems due to the nails and it is necessary to restore the weld in order to avoid breaking the mesh.
Other times, to prevent unpleasant problems, it is necessary to
oil the rails of the sliding mosquito nets with lubricants . This movement, in the spring protections is attenuated thanks to the presence of a brake, so as to limit the continuous violent stresses of the spring. This action is essential to ensure the operation and safety of the spring insect screen.
In addition, on Windowo you can find mosquito nets of excellent workmanship, resistant and with the minimum risk of breakage. Moreover, for any problems and tears you just have to disassemble your mosquito net,
send it to Windowo and we will take care of everything. Your mosquito net is shipped to the manufacturer at
no additional cost and the price is based on the repair only.
By purchasing on
www.windowo.it , you have this and many other comforts, in fact, compared to the physical store which can take a long time or decide not to help you in case of repair of the mosquito net,
Windowo is always there for you .
And if you need
spare parts , here you can always find tools such as the
roller for gaskets , gaskets and more.
