How to clean roller shutters quickly and easily? Discover the best tips for keeping your roller shutters clean.
Cleaning your roller shutters is not complex: you only need a few minutes and simple ingredients to keep them clean and sanitized.
The aim of the shutters is to obtain the safety of the house and the protection of the environments where you live from bad weather and sunlight. They are easy to use thanks to the special cord to raise and lower at will.
The internal and external areas of the shutters are affected by different types of wear. If the external part of the roller shutter is exposed to adverse weather (rain, dust, smog, frost, humidity) and smog, it is above all the internal part that is subject to dust and dirt and therefore needs to be cleaned every now and then.
Let me start by saying that I recommend that you
clean thoroughly at least twice a year : in this way you can also remove any encrustations that may harden over time.
There are several
natural remedies for cleaning roller shutters : let's see how to proceed.
The right way to clean roller shutters at home
How to clean the shutters quickly? Knowing this is very useful for maintaining your home in the best possible way.
Whether it's a daily cleaning or spring cleaning, roller shutters require a lot of attention. As we have already seen before, they rightly deserve all our care since they protect the home and shelter us.
Here is the complete guide on how to clean roller shutters with verified, natural and effective methods.
Before cleaning the shutters: check the materials and position of the window
There are some checks to be made before proceeding with the roller shutter cleaning phase.
Before doing anything I recommend that you
check the material with which the shutters of the house were made.
Shutters made of aluminum , wood, plastic or
armored shutters require different maintenance and cleaning substances.
Using incorrect products at your taxes could damage their integrity. In the case of a combination of different materials you will have to treat each part with the right product.
Then evaluate the
position in which the window you want to clean is located: if it overlooks a balcony or garden it will be simple. Otherwise use ladder and carefully start cleaning from the inside.
We have seen how to clean the external blinds. In summary:
- Find out about the material of the shutters : wood, metal, plastic, etc., so as to use the most suitable remedy;
- Evaluate the position of the window: if it overlooks your balcony or garden there are no problems;
- Pay close attention to safety : do not lean over to avoid falls. If you need to open the shutter box, get help if the height is too high.
First of all, the dust must be eliminated
After the preliminary operations to decide how to clean the shutters,
the dust must be eliminated .
With the shutter closed, remove the dust accumulated on its surface with a broom, a soft cloth or a vacuum cleaner. You could also use a brush to get to more complicated corners. Move in a straight line between the bands that make up the roller shutter,
following each strip .
Then raise the roller shutter by hand, then open the roller shutter box and clean the various parts that make it up.
Finish by
wiping with an antistatic fiber cloth : use it to clean thoroughly, paying attention to the inside of the box.
How to clean the shutters? Check out some simple tips and tricks
Here's how to clean roller shutters well and quickly with simple natural methods.
Clean the plastic shutters with Marseille soap and vinegar
Finally we can start the actual cleaning and wash the shutters.
To clean
PVC shutters, the products I suggest are
Marseille soap and vinegar.
Make a mixture of water and soap flakes and with a sponge or soft cloth pass it over the shutters. Once cleaned properly, rinse with plenty of warm water.
If there are stains or yellowed areas, add a few drops of white wine vinegar to the mixture.
If you want, you could spray a few drops on the most stubborn stains and let it act for a few minutes.
Finally, rinse.
Clean the shutters with steam and mop
An excellent alternative to the solutions we have talked about is the
steam used with brushes and guns. Steam has the power to dissolve encrustations, reach difficult areas and sanitize surfaces.
Do you want to use the
mop ? Fill a bucket with hot water, 5 tablespoons of vinegar and soak it. Wring and rub on the shutters: in case of stubborn stains, use a wet abrasive sponge to which add 2 drops of dish soap. Please: do a test first to avoid damaging the roller shutter.
If there are grease and grease stains then use water together with bicarbonate: create a cream to apply on the dirt and let it act for a few minutes. Finally rinse to remove residues.
Washing the shutters is child's play, but avoid splashing the dirt. Especially if you border with other apartments.
And to clean shutters made of other materials?
Cleaning plastic shutters is solved. If your house shutters are made of wood, you can use a
solution of water and ammonia .
For aluminum shutters the
baking soda with drops of lemon juice will help you degrease.
The final touches to clean the blinds
After cleaning the shutters thoroughly, use
cooking oil to lubricate the groove in which the shutter slides. Don't forget to
clean the straps using a damp microfiber cloth.
To clean wooden shutters you can pass vegetable oil and let it absorb. Finally polish with a cloth.
Our conclusions
The ones we have described to you are the best ways to maintain roller shutters without risking damage over time.
Have you read our guide too late and are your
adjustable or traditional roller shutters already damaged? Buying new shutters online on Windowo is not difficult and for sure it is much cheaper than traditional stores.
If you still have doubts, we recommend our
guide to buying roller shutters online , which you can find on the Windowo blog.
I recommend that you also visit the category on the
insulation of roller shutter boxes . You will find many products for the redevelopment of the compartment that houses the roller shutter cloth.
