Anta Ribalta 3D Futura for Cremonese Logic Configuration Base Giesse
This configuration for folding door contains the following items Giesse:
| article | Description | Amount | Color |
| 04706N | Group based fittings Cremona logic | 1 | neutral |
| 04711xxx | lower and upper hinges Group | 1 | choice |
| 04202000 | arm type 2 from 560 to 1700mm | * 1 arm | neutral |
| 04203000 | arm type 1 from 390 to 550mm | * 1 arm | neutral |
| 01039xxx | Cremonese model Before ** | 1 | choice |
The choice of color is determined by the customer selecting the appropriate option.
* You will be given one-armed among those proposed (your choice by selecting the second option).
** On request it is also possible to have the model Cremona First Key, Euro or Asia.
Optional items (sold separately on Windowo): - vertical and horizontal additional closures (Art. 04.77 million), required for doors with a height or width greater than 1200mm;
- Additional arm (art. 04301000), which is compulsory for windows and doors with increased leaf width of 1020mm;
- Items to be used in case of a second door (combined group door hinges art. 04711xxx, hinge connecting arm combined with art. 04728000, bidirectional deadbolt Art. 02191000 and meeting its superior art. 01348000).
Code: 04706N locking mechanisms to Anta Ribalta for Cremonese, in the Logic version. Referral, towing, toe movement and meetings in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Screws and set screws in stainless steel. Raising polyamide.
Code: 047011 Group hinges (upper and lower), completely pre-assembled and ready to be installed on the profile. Body in extruded aluminum and brass hinges. Supports in zamak with GS Silver Plus finish (up to 500 h of corrosion resistance). Pins, screws and set screws in stainless steel.
Code: 04202 (Arm Type 2) - 04203 (Arm Type 1) Allow the flap opening in conjunction with the mechanisms. Body, fixing block and drawstring in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Rod, rod, screws and stainless steel screws. Diskette stop polyamide.
Code: 01039 - Cremonese Prima Cremone bolt on both sides for the actuation of the Giesse mechanisms.
Handle in die-cast aluminum. Cash Cremona, gear racks and sliding of marine aluminum. Inner sheath and base Hostaform spring, screws and fixing plate in stainless steel. In the version in brass, chest and neck are made of brass. Equipment: 1 fixing plate and 2 M5x14 screws TCCE.
The use of die-cast materials of quality and the adoption of the Giesse painting system ensure high mechanical quality and uniformity of color and strong resistance to abrasion.
On request it is also possible to have the model Cremona First Key, Euro or Asia. If you are interested contact us.
